July 20, 2024
Installation Manual for Steel Security Fences

Installing security fencing is an excellent way to increase the safety and privacy of your property. Additionally, it serves to prevent wandering animals and prospective invaders.

Steel security fencing is an excellent option for residential and commercial properties alike. It offers a robust and reliable barrier against unauthorized entry or damage and can be linked to other security systems for enhanced protection.

Preparation

Preparation is essential in any fencing installation, like the steel fence installation Houston TX. Ensuring the site is completely clear of obstructions, such as trees, bushes, and small stones, is crucial.

Ideally, the fencing solution should be concreted or embedded in the ground. It will not only improve the overall strength of the structure but also protect it against the elements.

It should also be installed in a way that does not cause any damage to underground utility lines. Risking damage to these would result in a significant fine and disrupt service to the local area.

Security fencing is vital for any commercial or residential property, but installing the wrong type can compromise security. The simplest method to prevent this is to first and foremost describe appropriate solutions for the site.

Post Installation

The steel security fences system is a solid, durable solution providing excellent protection. It is also aesthetically pleasing, offering customers the option of choosing a powder-coated finish to match the surrounding architecture.

Installation is simple and requires little upkeep, making it ideal for any property. However, it is essential to make sure the fences are installed correctly.

Posts should be set to the correct height, typically four inches above the top of the fence panel. Plumb each side of the posts using a laser level.

Pour quick-set cement into each post hole and mix it well. Place each post into the hole one at a time. Fill the gaps to about 2/3 of the way complete, then leave them to set for 24 hours before continuing with the installation process.

The steel security fences system is an excellent choice for commercial and industrial properties that require superior security. It provides complete control over who enters the premises while being durable and long-lasting.

Rail Installation

Whether you need a security fence for your commercial property or your residential garden, the steel security fence system offers excellent security features, low maintenance, and durability. 

Step 1 – Set Posts to the Right Height

Before you start the concrete process, setting all posts to the proper height is essential. To do this, measure the desired size from the top of the fence posts and then use a level to ensure your marks are straight.

Next, you can fill the holes with concrete and secure them using screws and brackets. Fence panels can be inserted between the posts once the concrete has hardened. Ensure that they are plumb by using a laser level to adjust them as needed.

Digging

Digging is one of the most challenging parts of the fence installation process. It requires precision and physical strength, which are difficult to achieve if you’re an inexperienced do-it-yourselfer.

Professional fence installers know what type of soil and weather to expect, as well as local bylaws, so they can ensure the post holes are dug properly. It will save you a lot of hassle and stress down the road.

Besides knowing your local fencing bylaws, they will also have the proper equipment to dig the posts. It includes a post-hole digger, as well as shovels.

Before digging the post holes, you’ll need to determine where the corner posts and end posts will go. Then, drill the holes to a minimum depth of 4 times the diameter of the base. It is typically 2 1/2 feet for residential and 3 1/2 for gate posts.

Leave a Reply

Your email address will not be published. Required fields are marked *